Pipe Fittings & Flanges
Socket Weld Flange (ASME B16.5)
Socket weld flanges to ASME B16.5 - one fillet weld in the socket, specified for small-bore high-pressure piping up to NPS 2-1/2 where a smooth bore is not critical.
CATALOG
Products
Steel pipes, fittings, flanges, press fitting systems, pumps and PV brackets.
All products
170 products
View product
Valves
Globe Valve (Flanged, Bolted Bonnet)
Globe valves with bolted bonnet for accurate throttling and frequent on-off regulation of steam, water and process fluids - the linear-motion valve where flow control matters more than full-bore flow.
Pipe Clamps & Couplings
Single Pipe Clamp (Pipe-to-Support Fixing)
One-piece and two-piece pipe clamps with or without EPDM insert, M6-M12 fixing, sizes phi15-phi273 and above - hold pipes on brackets, channels and unistrut, in SS304/316 as standard.
Pipe Fittings & Flanges
Lap Joint Flange (ASME B16.5)
Lap joint flanges used with lap joint stub ends - the flange rotates freely for easy bolt alignment and dismantling, and allows cost-efficient material combinations such as a carbon steel flange with a stainless stub end.
Pipe Fittings & Flanges
Threaded Flange (ASME B16.5)
Threaded flanges to ASME B16.5 - no welding required, the practical type for maintenance, and for weld-restricted areas and small-bore utility connections.
Pipe Fittings & Flanges
Slip-On Flange (ASME B16.5)
Slip-on flanges to ASME B16.5 / EN 1092-1 - the pipe slips through the bore and is secured by two fillet welds, the economical choice for general service where the joint is not radiographed.
Pipe Fittings & Flanges
Weld Neck Flange (ASME B16.5)
Weld neck flanges to ASME B16.5 / EN 1092-1 - the long tapered hub gives the best joint integrity for high pressure and temperature and for cyclic service, where fatigue strength and stress transfer beat every other flange type.
Seamless Steel Pipe
Cold Drawn Precision Seamless Steel Tube
Cold drawn precision seamless steel tube family - tight-tolerance bores and finishes for hydraulic, automotive and robotic applications, with the full ASTM / EN / DIN standard conversion. Series: hydraulic cylinder tube, gas spring tube, shock absorber tube and robotic structural tube.
Seamless Steel Pipe
Gas Spring Precision Steel Tube
Cold drawn precision seamless tubes for gas spring bodies from 22x1.5 to 42x2.5 mm in SAE 1020, S355JR / A572 Gr50, C45 and 42CrMo4 - thin-wall cold drawn to wall deviation within ±0.05 mm and inner finish Ra within 1.6 um.
Seamless Steel Pipe
Robotic Arm Structural Precision Tube
Lightweight high-rigidity precision seamless steel tubes for robotic arm joints, exoskeletons and humanoid robot frameworks - including 316L stainless for nuclear and chemically aggressive service.
Seamless Steel Pipe
Shock Absorber Seamless Steel Tube
Seamless steel tubes for shock absorber and damper bodies from 30x2 to 60x3.5~4 mm in SAE 1020, SAE 1025, C45, S355JR / Q355B and 42CrMo4 - cold drawn with the surface finish and mechanical properties hydraulic damping depends on.
Seamless Steel Pipe
Hydraulic Cylinder Seamless Steel Tube
Precision cold drawn seamless steel tubes for hydraulic cylinder barrels - inner diameter tolerance within ±0.02 mm and bore finish Ra within 0.2 um, sizes 50x32 to 100x80 mm in SAE 1020, C45, 28Mn6, 34CrMo4 / 42CrMo4 and S355JR / A572 Gr50.
Page 1 of 15