CATALOG
Steel pipes, fittings, flanges, press fitting systems, pumps and PV brackets.
Cold drawn precision seamless steel tube family - tight-tolerance bores and finishes for hydraulic, automotive and robotic applications, with the full ASTM / EN / DIN standard conversion. Series: hydraulic cylinder tube, gas spring tube, shock absorber tube and robotic structural tube.
Cold drawn precision seamless tubes for gas spring bodies from 22x1.5 to 42x2.5 mm in SAE 1020, S355JR / A572 Gr50, C45 and 42CrMo4 - thin-wall cold drawn to wall deviation within ±0.05 mm and inner finish Ra within 1.6 um.
Lightweight high-rigidity precision seamless steel tubes for robotic arm joints, exoskeletons and humanoid robot frameworks - including 316L stainless for nuclear and chemically aggressive service.
Seamless steel tubes for shock absorber and damper bodies from 30x2 to 60x3.5~4 mm in SAE 1020, SAE 1025, C45, S355JR / Q355B and 42CrMo4 - cold drawn with the surface finish and mechanical properties hydraulic damping depends on.
Precision cold drawn seamless steel tubes for hydraulic cylinder barrels - inner diameter tolerance within ±0.02 mm and bore finish Ra within 0.2 um, sizes 50x32 to 100x80 mm in SAE 1020, C45, 28Mn6, 34CrMo4 / 42CrMo4 and S355JR / A572 Gr50.
Chromoly precision tube for racing kart frames and chassis fabrication - 25CrMo4 (4130 class), normalized, tight-tolerance cold drawn supply for kart manufacturers.
Seamless boiler tube of carbon or alloy steel for high-pressure fluids transmission in boilers, heat exchangers and condensers.
ASTM A106 Gr.B fluid pipe (seamless/ERW/welded) for transporting clean water or liquids with physical and chemical properties similar to water.
Cold drawn and annealed seamless low carbon steel tubing for pressurized hydraulic lines and hydraulic cylinders (high pressure tubing).
Carbon steel seamless pipe for mechanical and pressure applications, including ordinary steam, water, gas and air lines. Category: Carbon Steel Pipe&Tube.
Seamless pipe OD 10.3-1219mm, SCH5-XXS, to ASTM A106/A53, API 5L, DIN 1629 and GB/T8162-8163 - for pressure, structural and line-pipe duty.