Pipe Fittings & Flanges
Reducer (Concentric Reducer, Eccentric Reducer)
Butt weld concentric and eccentric reducers, NPS 3/4''-48'' (body also cites 1/2-56" and up to 80"), in carbon, stainless and alloy steel, for changing pipe diameter.
CATALOG
Products
Steel pipes, fittings, flanges, press fitting systems, pumps and PV brackets.
All products
170 products
View product
Pipe Fittings & Flanges
sanitary fittings
Sanitary stainless steel fittings (ferrules, clamp, weld, bevel seat, I-Line, Q-Line, European) in 304 and 316, sizes 1/2" thru 24" per spec table.
Pipe Fittings & Flanges
Sockolet
Socket weld branch outlet fitting (sockolet) for run pipes up to 48" with 1/2"-2" branches, 3000#/6000# ratings (body also lists 9000 class).
Pipe Fittings & Flanges
Steel Pipe Cap (Pipe End Cap, Pipe Steel Cap, Standard Steel Pipe Cap, Strong Steel Pipe
Butt weld, socket weld and threaded steel pipe caps NPS 1/2''-48'' (DN 12-1200), in carbon, stainless and alloy steel, for closing and waterproofing pipe ends.
Pipe Fittings & Flanges
Stub Ends
Carbon steel stub ends ASTM A106 Grade B seamless, 1/2" thru 24", all schedules, ASA-A long pattern and MSS-A short pattern, for use with lap joint flanges.
Pipe Fittings & Flanges
Tee (Equal/Unequal Tee, Cross Tee, Socket Tee, Short Tee, Forging Tee)
Butt weld tee fittings NPS 1/2''-36'' (body also cites up to 80"), equal and reducing forms, in carbon, stainless and alloy steel.
Pipe Fittings & Flanges
Threadolet
Forged threaded branch outlet fitting (threadolet) in run sizes 1/2"-48" and branch sizes 1/2"-24", classes 3000/6000/9000 lbs, socket weld or threaded NPT/BSP/BSPT ends.
Pipe Fittings & Flanges
Union (Pipe Union)
Class 150 lb 304 stainless steel pipe union, 1/2" F-NPT both ends, rated -20°F to 150°F; three-piece design (nut, female end, male end) for detachable pipe joints.
Pipe Fittings & Flanges
Valves
Valves: Product Name (body) Concrete Pump(Twin-Wall Pipe - 5.5mm for 80,000CBM - Most Wear Resistant); Wall thickness 3.5mm + 2.0mm length 3000mm; Material 65Mn and steel.
Pipe Fittings & Flanges
weldolet
weldolet: Run Pipe OD 1/2", 1", 2", 3", 4", 6", 8", 10", 12", 16", 20" to 48"; Branch Pipe OD 1/2", 3/4", 1", 1 1/2", 2"; Thickness SCH STD, SCH XS, SCH 160, SCH XXS.
Pipe Fittings & Flanges
STAINLESS STEEL UNION TEE 3/8 TUBE OD REF SS-600-3 (SS-600-3 ref)
316 stainless steel compression union tee for 3/8" tube OD (SS-600-3 ref), for use with 1/4" OD tubing.
Pipe Fittings & Flanges
316ss Stainless Orifice Plate 1-1/2-3/600 0.927in Inlet D481489
Square edge concentric orifice plate in SS 304/316 with mirror finish, 3 inch size, inlet bore 0.927in, used for flow measurement, restriction and pressure drop.
Page 6 of 15