Pumps & Sewage Lifting
Cutting Sewage Pump
Submersible sewage pump with a cutting impeller that macerates fibrous solids, 0.75-7.5 kW, sized for basements, buildings and plant effluent where blockage is the main risk.
Specifications
- Power
- 0.75-7.5 kW
- Impeller
- Cutting / macerating
- Protection
- IP68, insulation class F
- Media
- Temperature up to 40 C, pH 4-10
- Application
- Fibrous and solids-laden wastewater
Why a Cutting Impeller
Sanitary wastewater carries wipes, fibre and string that wrap around a standard impeller and eventually block the pump. A cutting pump shreds those solids as they enter, so the impeller keeps running instead of tripping on overload.
Our cutting range runs 0.75-7.5 kW with an IP68 sealed motor and class F insulation, sized for basement lifting, building drainage and plant effluent where blockage risk is the deciding factor.
Where It Fits Best
Choose a cutting pump where the stream is domestic or light-industrial wastewater with fibrous content: building and hospital sewage, restaurant and hotel effluent, and small plant drainage. For raw abrasive slurry, a standard sewage or slurry pump with an abrasion-resistant impeller is the better match.
Installation Notes
Cutting pumps are usually installed on a guide rail or feet in the wet well, with a non-return valve on the discharge to stop backflow between cycles. Confirm the required head, the discharge diameter and the control method before ordering.
Send your wastewater condition, flow, head and destination port to our engineering team for a confirmed pump selection.